How to calculate your selling price in Algeria without selling at a loss

In short: A selling price is built in three steps: full unit cost, profit, then tax. Confusing markup with margin quietly costs several points of profit. The tax regime changes the final price: 510.51 DZD at the standard VAT rate, 487.58 DZD under the IFU in our example. And the law sets a floor: no resale below actual cost price.

Keywords in this article

selling price unit cost markup margin VAT 19 % IFU reselling at a loss all-taxes-included price hourly rate overheads

1. What does one unit really cost you?

Every price starts from one figure, which is what a unit sold costs you once all charges are included. Many founders stop at the price of the raw material, which is where the calculation begins rather than where it ends.

Take a small workshop making a packaged food product at a rate of 12,000 units a year, with purely illustrative figures.

Item (per unit, excluding VAT)AmountHow it is obtained
Raw materials and packaging180 DZDPurchase invoices, brought back to one unit
Direct labour60 DZDProduction wages and social charges, divided by volume
Overheads: rent, energy, upkeep, equipment depreciation60 DZD720,000 DZD a year ÷ 12,000 units
Full unit cost300 DZD

The third line is the one people forget, because rent is due whether you sell or not. Spread it over your units, or your price will never pay for it.

It also hides a trap, since it moves with volume. At 6,000 units a year, the same 720,000 DZD weigh 120 DZD per unit and the full cost climbs to 360 DZD. So set your price on a volume you are sure to reach, not on the theoretical capacity of the machine. The minimum volume at which you stop losing money is covered in our article on the break-even point.

If you import to resell, the cost also carries bank fees, exchange costs and tied-up cash. We listed them in our article on import landed cost.

2. Markup or margin: where does the "0.7" come from?

This is the question that keeps coming back under pricing videos. Someone wants "30 % profit", sees a calculation that divides by 0.7, and gets completely lost. Both calculations are correct, but they answer two different questions.

  • Markup is computed on cost. Price = cost × (1 + rate). At 30 %: 300 × 1.30 = 390 DZD.
  • Margin is computed on the selling price. Price = cost ÷ (1 − rate). At 30 %: 300 ÷ 0.70 = 428.57 DZD. That is the "0.7": one minus 30 %.

The gap is not a rounding detail, and it widens as the rate rises.

Target ratePrice excl. VAT, as markup on costProfit as a share of pricePrice excl. VAT, as margin on priceProfit relative to cost
20 %360 DZD16.7 %375 DZD25.0 %
25 %375 DZD20.0 %400 DZD33.3 %
30 %390 DZD23.1 %428.57 DZD42.9 %
40 %420 DZD28.6 %500 DZD66.7 %

Basis is a full unit cost of 300 DZD. ProfitPilot calculations.

Which one should you use? The one you will later compare your actual results with. A shopkeeper who thinks "I must keep 30 % of what I take in" needs margin, whereas a manufacturer adding a percentage to cost uses markup. The classic mistake is to set the price with one and read the accounts with the other, so that you think you earn 30 % when you actually earn 23.

From here on we use a price of 429 DZD excluding tax, a profit of 129 DZD per unit.

The trap shows up with the first discount. A discount is always taken off the selling price, never off cost. Take the price set with a 30 % markup (390 DZD) and give a loyal customer 25 % off: he pays 292.50 DZD, below your 300 DZD cost. The same product priced with a 30 % margin (428.57 DZD) absorbs the same discount and still earns 21.43 DZD. The simple rule is that the largest discount you can grant without losing money equals your margin on price, not your markup on cost. For a reseller, dropping below the loaded purchase price because of a badly calculated discount also means reselling at a loss under article 19, which we come to below.

3. Where do VAT and the flat tax (IFU) enter the price?

The same product does not reach the customer at the same price, because that depends on the seller's tax regime, and three provisions are enough to see why.

  • Under the real regime, VAT is added to the pre-tax price. The standard rate is 19 % (article 21 of the Code des taxes sur le chiffre d'affaires) and the reduced rate 9 % for the closed list of article 23. Taxable turnover includes the price and all costs, duties and taxes, except VAT itself (article 15).
  • Under the single flat tax (IFU), the seller charges no VAT: the IFU covers income tax, VAT and the local solidarity levy (article 282 bis of the Code des impôts directs et taxes assimilées). It is 5 % for producing and selling goods, 12 % for other activities and 0.5 % for the auto-entrepreneur (article 282 sexies).
  • The IFU mainly concerns individuals whose annual turnover does not exceed 8,000,000 DZD, outside the activities excluded by article 282 ter (import for resale as is, wholesale and advertising agencies, among others).

What gets overlooked is that the IFU seller pays VAT on its own purchases and cannot recover it. In our example, 180 DZD of materials become 214.20 DZD, and the full cost rises from 300 to 334.20 DZD.

Same product, same 129 DZD profitReal regime, VAT 19 %Real regime, VAT 9 %IFU 5 %
Unit cost used300 DZD (input VAT recovered)300 DZD334.20 DZD (input VAT paid)
Price excluding tax429 DZD429 DZDnot applicable
Tax on the saleVAT 81.51 DZDVAT 38.61 DZDIFU 24.38 DZD
Price paid by the consumer510.51 DZD467.61 DZD487.58 DZD
Net cost to a business customer under the real regime429 DZD (it recovers the VAT)429 DZD487.58 DZD (nothing to recover)

ProfitPilot calculations, illustrative values. IFU price = (334.20 + 129) ÷ 0.95. Assumption: only materials bear input VAT. Under the real regime, income tax or corporate tax then hits the profit; under the IFU it is already inside the 5 %. Annual IFU turnover: 12,000 × 487.58 = 5,850,960 DZD, below the 8,000,000 DZD ceiling.

There are two readings, depending on who buys. Facing consumers, the IFU seller ends up cheaper than a seller charging the standard VAT rate. Facing a business under the real regime, it is the other way round: that buyer recovers the first seller's VAT and nothing from the second. Your tax regime is therefore part of your pricing policy, and we discuss the choice of status in our article on legal forms.

One correction is needed, because many Algerian price calculations still add 1 or 2 % of TAP. For most activities that is no longer right, as the local solidarity levy created by the 2024 finance law only applies to pipeline transport of hydrocarbons and to mining (article 231 bis of the Code des impôts directs et taxes assimilées).

Does your price really cover your costs?

Send us your purchase invoices along with your overheads and sales volumes. We compute your full unit cost and your minimum price under your tax regime.

Have my price checked

4. How low can you legally go?

Prices are free in Algeria, but within limits. Ordinance No. 03-03 on competition states that prices of goods and services are freely set under fair and open competition (article 4, as rewritten by Law No. 10-05).

Three limits bind whoever sets a price, whatever the sector.

  1. Reselling at a loss is prohibited. Law No. 04-02 forbids reselling goods below their actual cost price (article 19). That cost is the unit purchase price on the invoice, plus duties and taxes and, where relevant, transport. The law provides limited exceptions, notably for perishable goods, forced sales and seasonal or outdated goods.
  2. Some prices and margins are set by the State. Article 5 of Ordinance No. 03-03, rewritten by Law No. 10-05, allows margins and prices of goods and services to be fixed, capped or approved by regulation, particularly for staple products. For those products, Law No. 04-02 requires compliance (article 22, as amended by Law No. 10-06).
  3. The displayed price is the full price. Article 6 of Law No. 04-02 requires the displayed price to match the total amount the customer must pay. For consumers, that means an all-taxes-included price.

Article 19 targets resale. A trader who buys to resell cannot go below the loaded purchase price, even to attract customers, outside the exceptions in the law.

5. How do you price a service?

A service has no material to cost, but it has a cost, which is your time, and the method comes down to one division.

  1. Add up your annual overheads, from premises and travel to software and equipment, say 600,000 DZD.
  2. Add the pay you want for yourself, for instance 1,200,000 DZD a year.
  3. Estimate your truly billable hours, meaning not your working hours but the hours a client pays for, say 1,000 a year.
  4. Divide 1,800,000 by 1,000 to get 1,800 DZD an hour before tax. That is your floor hourly rate.

An auto-entrepreneur taxed at 0.5 % of turnover then bills about 1,809 DZD an hour (1,800 ÷ 0.995). Social contributions come on top; we computed them in our article on the turnover needed for a given net income.

Step 3 is where everything is decided, and in our engagements a freelancer starting out nearly always overestimates billable hours: prospecting, quotes, follow-ups, admin and travel eat a large share of the week. Divide by too many hours and you get a rate that looks competitive but does not pay a living.

The same logic answers a question a therapist asked under one of the videos: should the materials used in a session be counted? Yes, consumables go into the cost of each session, while durable equipment goes into annual overheads through depreciation.

6. And for a factory-made product?

The logic is that of the first table, and what changes is how overheads are spread. A factory makes several products on the same machines. Spreading rent and energy "by quantity" distorts costs as soon as products do not occupy the machines for the same time.

The plant is then split into sections (preparation, processing, packing), each gets a cost driver (machine hour, kilogram processed), and each product is charged what it actually consumes. That is the work of cost accounting, which is set up once and then updated each year with the accounts.

For a project that has not produced yet, this rests on yield and consumption assumptions. Those are the very assumptions a bank or AAPI examine in a feasibility study. A selling price without a detailed cost behind it does not survive a credit committee.

7. When should you follow the market price rather than your costs?

Your cost sets a floor, but it does not tell you what the customer will accept to pay. Once the floor is known, three situations can arise in practice.

  • The market pays more than your cost plus margin. Nothing forces you to sell at your calculated price. Align with the market or slightly below, and keep the difference.
  • The market pays between your cost and your target price. You can enter with a thinner margin. Check that volume follows, or your overheads per unit climb back.
  • The market pays less than your cost. That is not a pricing problem but a problem of cost, volume or product, and cutting the price would only speed up the loss.

For some products the question does not even arise. Raw materials and unbranded goods (fruit and vegetables at the wholesale market, cereals, metals, live poultry) sell at the price of the day, set by supply and demand, and the producer has to take it whatever his cost. There are two ways out. The first is a brand, which makes customers accept a price above the market because they see value in it. The second is processing, so that you no longer sell wheat but bread or pasta. And for part of the staple goods, neither the market nor the seller decides, since the State may fix or cap their prices and margins (Ordinance No. 03-03, article 5).

Knowing the market price means collecting it in the field, from competitors and distributors. That is the subject of our article on field checks for a market study. Choosing between a low price to win share and a high price for wealthier customers is a matter of pricing strategy, covered in our article on pricing strategy.

FAQ — Frequently asked questions

Sources and references

BENSAID Farouk ProfitPilot

BENSAID Farouk

Financial & Economic Research Consultant — ProfitPilot NextGen Consulting

Certified sole trader and expert in financial studies, risk analysis and market research for SMEs, startups and investors in Algeria. View full profile